Overview

Dexel is a Discord bot for AI chat, moderation, support tickets, giveaways, welcome messages and more. Pick a guide below to get going.

Every command, every button. No secrets here. Well, almost.

Start here

Popular guides

Add to Discord

Add Dexel to a server where you have the Manage Server permission.

Add Dexel

You need the Manage Server permission in the server.

Add to Discord

Steps

  1. Press Add to Discord, pick your server, and press Authorize.
  2. Dexel posts a hello message in your server. Press Set up AI chat on it if you want an AI channel right away.
  3. In Server Settings → Roles, drag the Dexel role above the roles it should manage. Dexel can't ban, time out, or give roles to anyone above it.
  4. Continue with Getting Started.

You can also add Dexel to your own account instead of a server. Then you can use commands like /chat anywhere, and the replies are only visible to you.

Getting Started

The first five things to set up after adding Dexel.

Set up your server

  1. See what's on. Run /dashboard. Most modules start off, so pick the ones you want in Modules.
  2. Turn on logs. Run /autolog, pick a private staff channel, and switch it on. See Logs.
  3. Welcome new members. Run /greetings and pick a welcome channel. See Welcome & Goodbye.
  4. Add an AI channel. Run /ai setup press 1-click setup, check the list, then press Apply. Don't use #general or your main chat: Dexel replies to every message in the AI channel, so make a channel just for AI. See AI Chat.
  5. Add support tickets. Run /ticket setup and follow the 7 steps. See Tickets.

Good to know

  • Panels: Commands like /greetings open a panel with buttons. Only the person who opened it can press them.
  • Module is off? If a command says the module is disabled, an admin can turn it on with its setup command or in /dashboard.
  • Lost? Run /help in Discord, or ask in the support server.

All Modules

Every module and command in one place: 24 modules, 97 commands. Open a module for its step-by-step guide.

24 doors. Pick one and walk in.

CommandWhoWhat it does
/dashboardManage ServerManage modules, command channels and server settings.
/serverEveryoneShow info about this server.
CommandWhoWhat it does
/banBan MembersBan a member, for good or for a set time.
/kickKick MembersRemove a member from the server.
/timeoutTimeout MembersStop a member from chatting for a while.
/unbanBan MembersLift a ban.
/untimeoutTimeout MembersLift a timeout.
/warnTimeout MembersGive a member a formal warning.
/modlogsTimeout MembersSee past moderation actions.
/slowmodeManage ChannelsMake members wait between messages.
/nukeManage ChannelsWipe every message in a channel.
CommandWhoWhat it does
/autologManage ServerPick a log channel and choose what gets logged.
CommandWhoWhat it does
/honeypotBan Members or Manage ServerSet up a trap channel for spam bots.
CommandWhoWhat it does
/dehoistManage NicknamesFix names that jump to the top of the member list.
CommandWhoWhat it does
/chatEveryoneAsk Dexel anything.
/talkEveryoneTalk with Dexel out loud in a voice channel.
/imagineEveryoneTurn a description into an image.
/ai usageEveryoneSee how much of today's AI allowance is used.
/ai setupEveryoneSet up the AI channel, server knowledge and your own keys.
CommandWhoWhat it does
/summariseEveryoneGet a short summary of a channel.
Summarize with AIEveryoneSummarize the conversation up to a message.
/transcribeEveryoneTurn an audio file into text.
Transcribe AudioEveryoneTurn a voice message into text.
Translate MessageEveryoneTranslate any message.
/paperEveryoneFind a research paper and get it explained.
/leetcodeEveryoneLook up someone's LeetCode stats.
CommandWhoWhat it does
/ticket setupManage ServerSet up tickets or change ticket settings.
/ticket closeManage Channels, or the ticket creator or ticket staffClose the ticket you are in.
CommandWhoWhat it does
/greetingsManage ServerSet up welcome, goodbye and welcome DM cards, the picture theme and the join role.
CommandWhoWhat it does
/activity leaderboardEveryoneSee the most active members.
/activity rolesEveryoneSee which roles you can earn.
/activity graphEveryoneSee activity over time as a chart.
/activity setupManage ServerTurn activity on and set up roles and messages.
CommandWhoWhat it does
/invites viewEveryoneSee invite stats for a member or the server.
/invites leaderboardEveryoneSee the top inviters.
/invites setupManage ServerTurn invite tracking on and set up reward roles.
CommandWhoWhat it does
/giveaway setupManage Events or Manage ServerTurn giveaways on or off and see how many are running.
/giveaway createManage Events or Manage ServerCreate and launch a giveaway step by step.
/giveaway editManage Events or Manage Server, or the giveaway hostChange a running giveaway.
/giveaway pauseManage Events or Manage Server, or the giveaway hostFreeze a giveaway.
/giveaway resumeManage Events or Manage Server, or the giveaway hostContinue a paused giveaway.
/giveaway infoManage Events or Manage Server, or the giveaway hostSee stats for a giveaway and control it.
/giveaway endManage Events or Manage Server, or the giveaway hostEnd a giveaway now and pick winners.
/giveaway rerollManage Events or Manage Server, or the giveaway hostPick new winners for an ended giveaway.
/giveaway cancelManage Events or Manage Server, or the giveaway hostStop a giveaway without picking winners.
/giveaway listEveryoneList running giveaways and their IDs.
CommandWhoWhat it does
/tournament setupManage Events or Manage ServerTurn tournaments on or off, pick the staff role and blocklists.
/tournament createManage Events or Manage ServerCreate a tournament step by step.
/tournament manageManage Events or Manage Server, or the tournament host or tournament staffStart a tournament, set scores and manage players.
/tournament listEveryoneSee the tournaments in this server.
/tournament infoEveryoneSee a tournament's status, places and your next match.
/tournament teamEveryoneSee and manage your team.
/tournament reportEveryoneReport your match score, with a screenshot.
CommandWhoWhat it does
/starboard setupManage ServerSet up the starboard channel, emoji and star count.
/starboard leaderboardEveryoneSee who gets the most stars.
CommandWhoWhat it does
/stickyManage Messages or Manage ServerKeep a message at the bottom of a channel.
CommandWhoWhat it does
/feedsManage ServerAdd and manage Reddit, YouTube and GitHub feeds.
CommandWhoWhat it does
/counting setupManage ServerPick the counting channel and manage the count.
/counting statsEveryoneSee the current count and high score.
/counting resetManage ServerReset the count to 0.
/counting disableManage ServerTurn the counting game off.
CommandWhoWhat it does
/playEveryonePlay a song or add it to the queue.
/skipEveryoneSkip the song, or vote to skip it.
/music boothEveryonePost the music player.
/music likedEveryoneSee and play your liked songs.
/music historyEveryoneSee and replay recently played songs.
/playlist viewEveryoneSee and open your playlists.
/playlist playEveryonePlay a playlist or your liked songs.
/playlist createEveryoneMake a new playlist.
/playlist importEveryoneImport a Spotify, YouTube or JioSaavn playlist.
/playlist openEveryoneOpen a shared playlist by its code.
/playlist renameEveryoneRename one of your playlists.
/playlist deleteEveryoneDelete one of your playlists.
/queueEveryoneSee and edit the queue.
/music leaderboardEveryoneSee the top listeners and songs.
CommandWhoWhat it does
/walletEveryoneSee a coin balance.
/giveEveryoneSend coins to someone.
/economy leaderboardEveryoneSee who has the most coins.
/inboxEveryoneSee your recent notifications.
/shopEveryoneThe coin shop (coming soon).
CommandWhoWhat it does
/remind createEveryoneSet a reminder.
/remind listEveryoneSee and cancel your reminders.
/remind cancelEveryoneCancel a reminder.
CommandWhoWhat it does
/afk setEveryoneMark yourself as away.
/afk clearEveryoneEnd your AFK.
/afk setupEveryoneChange your AFK settings.
/afk statusEveryoneCheck if you or someone else is AFK.
/afk listEveryoneSee who's AFK in this server.
CommandWhoWhat it does
/profileEveryoneSee a member's profile card.
/settingsEveryoneChange your timezone, notifications and privacy.
CommandWhoWhat it does
/brandingManage ServerGive Dexel a custom name, picture, banner and bio here.
CommandWhoWhat it does
/helpEveryoneBrowse commands or look one up.
/voteEveryoneVote for Dexel to get more AI usage.
/premiumEveryoneSee and use your Premium slots.
/aboutEveryoneLearn about Dexel.
/inviteEveryoneGet links to add Dexel and join support.
/pingEveryoneCheck that Dexel is online.

Server Setup

Turn modules on or off, choose where commands can be used, and set your server rules, all from one panel.

How to use it

Turn a module on or off

  1. Run /dashboard and pick Modules in the page menu.
  2. Pick the module in Open a module.
  3. Press Turn on automatic features or Turn off automatic features.

Limit commands to certain channels

  1. In Modules, open the module and pick a command (or all of them) in Limit or disable a command.
  2. Pick channels in Only allow in and/or Block in. Picking a category covers every channel in it.
  3. Press Reset to enabled everywhere to undo.

Good to know

  • Automatic features: What a module does on its own, like welcome messages or logs. While off, the module's commands are blocked too, except its setup command so you can turn it back on.
  • Commands: Whether members can use the module's commands and buttons. Turning them off keeps your channel limits.
  • Always available: /dashboard, /server, /help, /premium, /vote, /invite, /about and /ping can't be turned off.

Commands

/dashboard
Setup Manage Server

Opens the setup panel on its Home page. Only you can use it. Use the Go to page menu to move between pages.

On the panel
  • Home: Which modules are on and off, and a link to the web dashboard.
  • Modules: Every module with its status. Open a module shows its commands and these controls:
    • Turn on / Turn off automatic features: Turns the module's background work on or off.
    • Commands: On / Off: Lets or stops members using the module's commands.
    • Limit or disable a command: Set Only allow in and Block in channels for one command or all of them, or turn it off.
  • Server settings: Settings for the whole server:
    • Edit rules / Import rules from a channel: Your server rules. Dexel uses them to answer questions in the AI channel and in tickets.
    • Edit about server: Background info Dexel should know about your server.
    • Word filter: How Dexel shows swear words in its messages: as-is, masked (f***), or replaced with [censored].
    • Voice transcripts: On / Off: Whether voice messages get turned into text automatically.
/server
Setup Everyone

Posts a card with the server's owner, creation date, member count, channels and boost level.

Moderation

Ban, kick, time out and warn members, check their history, and clean up channels.

Always on. Each command needs the matching Discord permission, and Dexel's role must be above the member you act on.

How to use it

Punish a member

  1. Run /ban, /kick, /timeout or /warn and pick the member.
  2. Add a reason. The member sees it in their DM, and it is saved to their history.
  3. A result card is posted in the channel. Turn on silent if only you should see it.
  4. If Logs are set up, a copy goes to your log channel with quick Unban User, Remove Timeout and Mod History buttons.

Ban someone for a while

  1. Run /ban with a duration, like 7d.
  2. Dexel unbans them by itself when the time is up.

Check someone's history

  1. Run /modlogs with a user to see their last 15 actions, or without one to see the latest actions in the whole server.

Wipe a channel

  1. Run /nuke in the channel (or pick one).
  2. Press Confirm Nuke within 45 seconds.
  3. The channel is replaced by a fresh copy with the same name, topic, permissions and position. Dexel's own settings that used the old channel move over to the new one.

Commands

/ban <user> [delete_message_history] [reason] [duration] [notify_user] [silent]
Moderation Ban Members

Bans the user, even if they already left (paste their user ID). A card shows who was banned, by whom, for how long, and why.

OptionRequiredWhat it does
userRequiredThe person to ban. A mention or a user ID.
delete_message_historyOptionalDelete their recent messages, up to 7 days back (1h, 1d, 7d).
reasonOptionalWhy they were banned.
durationOptionalMakes it temporary, like 2h, 7d or 2w. Leave empty for a permanent ban.
notify_userOptionalDM the member about it. On by default.
silentOptionalOnly you see the result card.
/kick <user> [reason] [notify_user] [silent]
Moderation Kick Members

Kicks the member. They can come back with a new invite.

OptionRequiredWhat it does
userRequiredThe member to kick.
reasonOptionalWhy.
notify_userOptionalDM the member about it. On by default.
silentOptionalOnly you see the result card.
/timeout <user> <duration> [reason] [notify_user] [silent]
Moderation Timeout Members

The member can't send messages, react or join voice until the time is up.

OptionRequiredWhat it does
userRequiredThe member to time out.
durationRequiredHow long, up to 28 days: 5m, 1h, 1d. Type remove to lift a timeout.
reasonOptionalWhy.
notify_userOptionalDM the member about it. On by default.
silentOptionalOnly you see the result card.
/unban <user> [reason]
Moderation Ban Members

Unbans the user (paste their user ID) and posts a card in the channel. Also cancels a temporary ban timer.

OptionRequiredWhat it does
userRequiredThe banned user. A user ID works.
reasonOptionalWhy.
/untimeout <user> [reason]
Moderation Timeout Members

Removes the member's timeout right away and posts a card in the channel.

OptionRequiredWhat it does
userRequiredThe member.
reasonOptionalWhy.
/warn <user> [reason] [notify_user] [silent]
Moderation Timeout Members

Nothing changes for the member in the server. They get a DM and the warning is saved to their /modlogs history.

OptionRequiredWhat it does
userRequiredThe member to warn.
reasonOptionalWhy.
notify_userOptionalDM the member about it. On by default.
silentOptionalOnly you see the result card.
/modlogs [user]
Moderation Timeout Members

Shows the 15 most recent actions (bans, kicks, timeouts, warnings, nukes, name fixes) with who did it, when, and why. Bans and kicks done by hand in Discord show up too.

OptionRequiredWhat it does
userOptionalOnly show this person's history. Leave empty for the whole server.
/slowmode [seconds] [channel] [remove_after]
Moderation Manage Channels

Sets the slowmode for a channel. Run it with no options to see the current slowmode.

OptionRequiredWhat it does
secondsOptionalThe wait, from 0s to 6h: 30s, 5m. 0s turns it off.
channelOptionalWhich channel. Defaults to this one.
remove_afterOptionalTurn slowmode off again after this long, like 10m.
/nuke [channel] [reason] [preserve_pins]
Moderation Manage Channels

Shows a confirmation first. After you confirm, the channel is replaced by an identical empty copy with a "Channel Nuked" message at the top. This can't be undone.

OptionRequiredWhat it does
channelOptionalThe channel to wipe. Defaults to this one.
reasonOptionalShown in the new channel and in the logs.
preserve_pinsOptionalRepost and pin the pinned messages (up to 50) in the new channel.
On the panel
  • Confirm Nuke: Wipes the channel.
  • Cancel: Stops. The nuke also cancels itself after 45 seconds.

Logs

Get a message in one channel whenever something happens in your server: bans, deleted or edited messages, role changes, people joining and more.

Off by default. Turn it on in /autolog.

How to use it

Set up logs

  1. Make a private channel for logs that only staff can see.
  2. Run /autolog.
  3. Pick that channel in the Select Master AutoLog Text Channel dropdown.
  4. Press Turn on. Every kind of log starts switched on.

Turn off one kind of log

  1. Run /autolog and pick a category in the top dropdown, like Voice Activity.
  2. Press the button for the log you don't want so it shows Off.

What gets logged

  • Moderation: Bans, unbans, kicks, timeouts, warnings, slowmode and nukes, whether done with Dexel or by hand in Discord.
  • Discord AutoMod: Messages blocked by Discord's AutoMod, and nicknames fixed by Dehoist.
  • Members: Joins (with account age), leaves, roles added or removed, nickname changes.
  • Messages: Deleted messages, edits (before and after), and bulk deletes. Messages from bots are skipped, and passwords or keys are hidden.
  • Server & channels: Channels and roles created, changed or deleted, server setting changes, and invites created or deleted.
  • Voice: Joining, leaving and switching voice channels.

Commands

/autolog
Logs Manage Server

Opens the logs panel showing the status, log channel, and how many log types are on. Only you can use it, and changes save right away.

On the panel
  • Category dropdown: Switches between the main page and the log categories: Moderation, Members, Messages, Server & Channels, Voice.
  • Select Master AutoLog Text Channel: The channel logs are sent to.
  • Turn on / Turn off: Turns all logging on or off.
  • All detectors: On / Off: Turns every log type on at once (or all off if they are already on).
  • Log type buttons: On each category page, one button per log type, like Message Deletes: On. Press it to switch it.
  • Whole category: On / Off: Turns every log type on that page on or off.
  • Back: Returns to the main page.

Dexel needs the View Audit Log permission to show who banned or kicked someone by hand. The panel stops working after 10 minutes, so run the command again if it does.

Honeypot

A trap channel that catches spam bots and hacked accounts. Anyone who posts in it is removed automatically.

Off by default. Turn it on in /honeypot.

How to use it

Quick setup

  1. Run /honeypot and press 1-Click setup.
  2. Dexel creates a #honeypot channel, pins a warning in it, and turns the trap on. If a trap is already set up, it only fixes what is broken (missing channel, permissions, warning card, action set to Disabled, or the trap turned off).
  3. Anyone who isn't an admin and posts there is softbanned: banned and unbanned right away, which deletes their messages from the last 24 hours.

Use your own channel or action

  1. Run /honeypot and press Settings.
  2. Pick the trap channel and what should happen (softban, ban, kick, or a 1 hour timeout).
  3. Press Turn on, then Post warning card.

See who got caught

  1. Set up Logs. Each catch posts a card there with the user, their account age, and what they sent.

Commands

/honeypot
Honeypot Ban Members or Manage Server

Opens the honeypot panel with the status, trap channel, action and catch count. It warns you if Dexel is missing permissions. Only you can use it.

On the panel
  • Turn on / Turn off: Turns the trap on or off.
  • 1-Click setup: Creates the trap channel, pins the warning, and turns it on.
  • Settings: Opens the settings page:
    • Select a Trap Channel: The channel that acts as the trap.
    • Choose Moderation Action: Softban (recommended), Permanent Ban, Kick, Timeout (1 hour), or Disabled.
    • Turn on / Turn off: Turns the trap on or off.
    • Post warning card: Posts and pins the warning in the trap channel, or updates it.
    • Templates: Edit warning card and Edit DM notice change the warning text and the DM sent to caught users. Reset defaults restores them.
    • Advanced: DM notice, Reinvite link and Warning card toggles. Turn the DM on or off, send a one-time invite back (for softban and kick) so hacked members can return, and choose whether the trap shows a warning card. Add {{reinvite:link}} to the DM text for the invite to show.

Admins and the server owner are never punished. Their message is just deleted.

Dehoist

Fix nicknames that start with symbols like ! or ., so nobody can push their name to the top of the member list.

Off by default. Turn it on in /dehoist. Dexel needs the Manage Nicknames permission.

How to use it

Fix names automatically

  1. Run /dehoist and press Turn on.
  2. Dexel now checks new members and anyone who changes their name, and fixes names that start with a symbol.

Clean up names already in the server

  1. Run /dehoist and press Scan server to see how many names need fixing.
  2. Press Dehoist N members, then Start (N members).
  3. Watch the progress. Press Stop to stop early.

Fix one member

  1. Press Dehoist user, type their username or user ID, and optionally a new nickname.

Commands

/dehoist
Dehoist Manage Nicknames

Opens the dehoist panel with your current settings. Only you can use it.

On the panel
  • Turn on / Turn off: Fixes names automatically when people join or change their name.
  • Scan server: Counts the names that need fixing without changing anything. From there, Dehoist N members fixes them.
  • Dehoist all: Fixes every name that needs it, with a progress bar you can stop.
  • Dehoist user: Fix one member. Optionally give them a specific nickname.
  • Mode: Strip / Replace: Strip removes the symbols (!!Alex becomes Alex). Replace always uses the fallback name.
  • Ignore bots: On / Off: On skips bot names. Off fixes them too.
  • Edit fallback name: The name used when nothing is left after stripping. {username} inserts their username. Default: Dehoisted {username}.
  • Custom hoist chars: Extra characters to treat as hoisting, like ⚡👑.
  • Select Exempt Roles: Up to 5 roles that are never renamed.
  • Reset defaults: Puts all settings back to default after you confirm.

Dexel never renames the server owner or anyone with a role equal to or above its own. Every rename is saved to /modlogs.

AI Chat

Chat with Dexel in an AI channel, in DMs, or with /chat. It can also make images, look at pictures, and help manage your server.

The chatbot runs on Google Gemini.

On by default. Turning AI off in /ai setup also turns off the AI tools like summaries and transcripts.

How to use it

Set up an AI channel (admins)

  1. Run /ai setup.
  2. Press 1-click setup. Dexel posts a list of what it will change, what is already correct and any missing permissions. Press Apply and Dexel creates #dexel-chat (no category), lets everyone view and post in it, and turns AI on. Running it again only fixes what is broken.
  3. Or use your own channel: pick a channel just for AI in the channel menu on the same page. Don't use #general or your main chat, since Dexel replies to every message there.
  4. Send a message in the AI channel. Add --ignore to a message if you want Dexel to skip it.
  5. Optional: in Server settings, set a System prompt and open Knowledge (rules, about the server, FAQs) so Dexel knows your server.

Chat anywhere else

  1. Run /chat with your question. Dexel remembers the last few messages for 30 minutes.
  2. Or send Dexel a DM.

Talk out loud in a voice channel

  1. Join a voice channel and run /talk. Dexel joins and you get a card only you can see.
  2. Just start talking. Dexel answers out loud.
  3. Friends in the channel run /talk too to join in. In a group, Dexel answers when someone talks to it.
  4. Press Leave on your card to end the chat. A transcript is posted in the voice channel's chat.

Ask Dexel to change your server

  1. In the AI channel, ask for something like "make a #memes channel" or "time out @spammer for 1 hour".
  2. Dexel posts a plan card. Press Run to apply it, Change to adjust it, or Cancel. Full plan shows every step, only to you.
  3. The same card then shows how each step went. Changed your mind? Press Undo on it.

Daily usage

  1. Everyone gets a daily AI allowance, shown as a percent in /ai usage. It resets every day at 00:00 UTC.
  2. Each /vote adds 20% for 12 hours (40% on weekends). Premium gives 10x the allowance.
  3. Using your own API key? Then your messages don't count against the allowance.

Use your own API key (optional)

  1. Run /ai setup, open Your settings, then API keys.
  2. Pick an empty slot and fill in your provider, a name, and your key.
  3. Back in Your settings, pick that slot in the model menu.
  4. It works in DMs, and in servers where admins turn on Members can use their own API keys.

Commands

/chat <prompt> [reset]
AI Everyone

Dexel answers in the channel. /ai chat still works too, but it moved here.

OptionRequiredWhat it does
promptRequiredYour question or message.
resetOptionalForget the earlier conversation and start fresh.
/talk
AI Everyone

Dexel joins your voice channel and talks with you out loud. Friends in the channel can join in. Everyone who runs it gets their own card that only they can see.

On your card
  • Enable listen and talk / Disable listen and talk: Turns Dexel listening to you on (green) or off (red). Running /talk turns it on.
  • Config: Switches the card to your settings: Voice (24 voices), Language (auto or one of 16), and Deep thinking (smarter, slower, uses more of your allowance). Back returns. Settings apply to the next chat you start. In a group, the starter's settings are used.
  • Leave: Ends the chat for everyone.
Good to know
  • Dexel only hears people who turned on listen and talk. Audio is not stored.
  • In a group, Dexel answers when someone talks to it and stays quiet when you talk to each other.
  • When the chat ends, a transcript file is posted in the voice channel's chat. Some lines may be missing.
  • Each turn uses the daily AI allowance of whoever spoke.
  • Dexel leaves after 10 minutes with no one talking, when everyone leaves the channel, or after 30 minutes.
  • One chat per server at a time. Doesn't work in stage channels yet. Admins can turn it off in /dashboard > Modules.
/imagine <prompt> [model] [aspect_ratio] [negative] [nologo] [seed]
AI Everyone

Posts the image in the channel with its settings. Each image uses some of your daily AI allowance, shown next to each model.

OptionRequiredWhat it does
promptRequiredWhat you want to see, like "a red fox reading in a cozy library, watercolor".
modelOptionalFast (default), Ultra (highest detail), Crisp, Balanced (photo-like) or Artistic (illustrations).
aspect_ratioOptionalSquare (default), Landscape, Portrait, 4:3 or 3:2.
negativeOptionalThings to keep out, like "text, blurry".
nologoOptionalHide watermarks. On by default.
seedOptionalA number that gives repeatable results.
On the panel
  • Regenerate: Pick a model and get a new image from the same prompt. Only you can press it.
  • View Full Res: Opens the full-size image.
/ai usage [user]
AI Everyone

Shows a percent bar, when it resets, your plan, and any vote boost.

OptionRequiredWhat it does
userOptionalCheck someone else instead.
On the panel
  • Personal Quota: Your own daily usage.
  • Server Ticket Pool: The server's separate allowance used by Tickets.
  • Boost with /vote: Opens the vote card so you can get more usage.
  • Get Premium / Upgrade Server: Shows what Premium adds.
  • Refresh: Updates the numbers.
/ai setup
AI Everyone

Opens AI Setup: how Dexel AI works, with the AI channel menu for admins. Everyone can change Your settings. Server settings need Manage Server.

On the panel
  • Home: How Dexel AI works in your server. Admins also get the AI channel menu (pick a channel just for AI, not #general), Turn on / Turn off, 1-click setup (shows what it will change, then Apply creates or repairs #dexel-chat and turns AI on) and More (reset, web dashboard).
  • Server settings: For admins:
    • Server model: Dexel Default or one of up to 5 of the server's own API keys (Models, with Test keys and Delete a slot).
    • Replies to messages: Whether Dexel replies to your message or posts a plain message.
    • Members can use their own API keys.
    • System prompt: Instructions for how Dexel should behave (Dexel Default model only).
    • Knowledge: Server rules, about the server and up to 10 FAQs. Shared with Tickets.
    • Tools: Switch what Dexel may do: web search, extra tools, server admin, moderation, economy, image vision, voice messages.
  • Your settings: Your model, up to 5 of your own API keys, today's usage as a percent, and Clear my context.
  • Every page has a blue Home button. After each change, Dexel sends you a short private message saying what changed.

Tools

Summarize a busy channel, turn voice messages into text, translate any message, get research papers explained, and look up LeetCode stats.

On by default. Summaries, transcripts and papers turn off if an admin turns AI off in /ai setup.

How to use it

Catch up on a channel

  1. Run /summarise and pick the channel. Add since:2h to cover just the last two hours.
  2. Or right-click a message, then Apps > Summarize with AI to summarize the conversation up to that message.

Read a voice message

  1. Dexel replies to voice messages and audio files with the text automatically.
  2. For older ones, right-click the message, then Apps > Transcribe Audio, or use /transcribe with a file.
  3. Admins can turn automatic transcripts off in /dashboard.

Translate a message

  1. Right-click (or long-press) a message, then Apps > Translate Message.
  2. You see the English translation privately. Pick another language from the dropdown if you need one.

Commands

/summarise <channel> [limit] [since] [topic]
Tools Everyone

Reads recent messages in the channel (skipping bots) and posts a summary in the current channel. /summarize works too.

OptionRequiredWhat it does
channelRequiredThe channel to summarize.
limitOptionalHow many recent messages to read. Default 100, max 500.
sinceOptionalOnly cover this time, like 30m, 2h, 1d.
topicOptionalFocus on one subject, like "event planning".
Right-click a message > Apps > Summarize with AI
Tools Everyone

Summarizes the chosen message and about 50 before it. Works in servers, DMs and group chats.

/transcribe <file> [language]
Tools Everyone

Posts the text from the audio in a card.

OptionRequiredWhat it does
fileRequiredAn audio or voice file (mp3, wav, ogg, m4a and more), up to 25 MB.
languageOptionalThe spoken language, like en, es or hi, if Dexel gets it wrong.
On the panel
  • Yes / No: Tell Dexel whether the text is right.
  • Translate: See the text in English, privately.
Right-click a message > Apps > Transcribe Audio
Tools Everyone

Writes out the first voice message or audio file in the message. Same card and buttons as /transcribe.

Right-click a message > Apps > Translate Message
Tools Everyone

Shows the message in English, only to you, with the language it was written in. Works on voice messages too.

On the panel
  • Translate to another language: Pick one of 25 languages, like Spanish, Hindi or Japanese.
/paper <query>
Tools Everyone

Shows matching papers from arXiv with authors, date and a short summary.

OptionRequiredWhat it does
queryRequiredA topic, a title, or an arXiv ID or link.
On the panel
  • Paper dropdown / Previous / Next: Browse the results.
  • Key Insights: The problem, the new idea, and the main results.
  • Deep Dive: A detailed look at the method and its limits.
  • ELI5: A simple explanation with an everyday example.
  • Ask Question: Ask anything about the paper.
  • PDF / HTML / Code: Links to read the paper or its code.
/leetcode <userid>
Tools Everyone

Shows their global ranking and how many easy, medium and hard problems they solved.

OptionRequiredWhat it does
useridRequiredTheir LeetCode username.

Tickets

Let members open private support tickets with one button. The AI can answer first, and staff step in when needed.

Off by default. Finishing the setup in /ticket setup turns it on.

How to use it

Set up tickets

  1. Run /ticket setup. A 7-step setup opens. Press Continue after each step.
  2. Pick the channel where tickets will be created (each ticket is a private thread in it).
  3. Pick your staff role.
  4. Press Edit welcome message to write the title and text members see.
  5. Press AI auto-reply to choose whether the AI answers tickets first. Edit AI prompt lets you give it background info.
  6. Press Set timeout to choose how long a quiet ticket stays open before it closes itself (like 1d), or press Turn off auto-close.
  7. Pick a log channel for closed-ticket summaries, then the channel for the Create Ticket panel.
  8. Press Save and post panel. Tickets are now on and the panel is posted.
  9. Optional: add FAQs and Rules from the settings card so the AI can answer common questions.

Open a ticket (members)

  1. Press Create Ticket on the panel and type your reason.
  2. A private thread opens with you and the staff. You get a link to it.
  3. If AI replies are on, the AI answers right away. Press Call Staff any time to get a person. If AI replies are off, staff are pinged.

Close a ticket

  1. Press Close Ticket in the ticket, or run /ticket close inside it.
  2. The thread is locked, and a short summary is posted in it, sent to the member by DM, and posted in the log channel.
  3. Staff can press Delete Ticket to remove the thread.

Inside a ticket

  • Close Ticket: Closes the ticket. The member, staff, or anyone with Manage Channels can use it.
  • Call Staff: Pings the staff role and stops the AI in this ticket. Only the member can press it, once every 10 minutes. Typing things like "talk to a person" works too.
  • Staff reply: When a staff member types in the ticket, the AI stops replying there.
  • Auto-close: A quiet ticket gets a warning first, then closes itself. Any new message resets the timer.
  • Delete Ticket: Shown after closing. Deletes the thread. Staff only.

Commands

/ticket setup
Tickets Manage Server

The first time, opens the 7-step setup. After that, opens the settings card. Only you can press its buttons.

On the panel
  • Turn on / Turn off: Turns tickets on or off. While off, members can't open tickets and the AI stops replying.
  • Send panel: Posts a new Create Ticket panel in the current channel.
  • FAQs: Add up to 10 questions and answers the AI uses in tickets.
    • Add FAQ: Type a question and its answer.
    • Delete dropdown: Pick an FAQ to remove it.
  • Rules: Your server rules, used by the AI and shown in /server.
    • Edit manually: Type or paste your rules.
    • Fetch from channel: Pick your rules channel and Dexel copies the rules from it.
    • View full rules / Clear rules: See or remove the saved rules.
  • Auto-close: How long a quiet ticket stays open, like 2h or 1d (max 7 days). 0 turns it off.
  • Restart setup: Runs the 7-step setup again with your current settings filled in.
  • Delete config: Removes all ticket settings after you confirm.
/ticket close
Tickets Manage Channels, or the ticket creator or ticket staff

Run it inside a ticket. Works like the Close Ticket button: the thread is locked and the summary is posted and sent. The member who opened it can use it too.

Welcome & Goodbye

Welcome new members with a card that has a picture of them, say goodbye when they leave, send new members a welcome DM, and give them a role automatically. Pick the picture's theme: Lo-fi room, Synthwave, Pixel loot, Winter night or Blossom spring.

Off by default. Turn it on in /greetings.

How to use it

Set up welcome messages

  1. Run /greetings and press 1-click setup, or open Welcome, turn it on and pick a channel. Then press Turn on.
  2. Press Edit next to Words to write the card: a message line, a heading, text and a small line. Placeholders like {mention} and {server} fill in the member and the server.
  3. Press Theme to see every theme drawn with your own avatar, and pick one.
  4. Press Test welcome to see how it looks.

Send a welcome DM

  1. Open Welcome DM, turn it on and write its card. It can use its own theme. Members with closed DMs are skipped.

Give new members a role

  1. In Settings, pick an Auto role. Dexel's role must be above it.

Set up goodbye messages

  1. Open Goodbye and set it up the same way.

Commands

/greetings
Greetings Manage Server

Opens the greetings panel. Changes are confirmed in a message only you see.

On the panel
  • Turn on / Turn off: Turns greetings on or off.
  • Settings: Which messages are on, the welcome and goodbye channels, and the auto role.
  • Welcome / Goodbye / Welcome DM: Each card:
    • On / Off: Turns just this card on or off.
    • Words: The message line, heading, text and small line.
    • Picture: The themed picture of the member, on or off.
    • Channel dropdown: Where it is posted (not for the DM).
    • Test: Sends a sample using your profile (the DM test goes to your DMs).
  • Theme: Every theme drawn with your avatar. Pick one for welcome and goodbye posts and one for the welcome DM. Preview mine shows your cards privately.
  • Placeholders: Shows the tags you can use, like {mention}, {display_name}, {server}, {member_count} and {inviter}.

Activity

Members earn points for chatting and talking in voice. Show a leaderboard and give roles automatically when members reach a target.

Off by default. Turn it on in /activity setup.

How to use it

Set it up

  1. Run /activity setup. The first time, a short setup asks for the rolling window, a first reward role, and where level-up messages go. Then press Turn on.
  2. To add more roles, press Manage roles > Add role tier, pick a role, and type the points needed (like 100). Add as many as you want.
  3. Make sure Dexel's role is above those roles in Server Settings > Roles.
  4. Optional: open Announcements to choose where level-up messages go.

How points work

  1. 1 point per message, at most once a minute.
  2. 0.2 points per minute in voice, when at least 2 people are there and not muted or deafened.
  3. Only recent activity counts (the last 7 days by default). If a member goes quiet, their points drop and they can lose a role.

See where you stand

  1. /activity leaderboard shows the top members.
  2. /activity graph shows your points over time.
  3. /activity roles shows which roles you can earn.

Commands

/activity leaderboard [days] [source]
Activity Everyone

Posts a leaderboard image, 10 members per page, with your own rank at the bottom.

OptionRequiredWhat it does
daysOptionalHow many days to count, like 14.
sourceOptionalCombined (default), text only, or voice only.
On the panel
  • ◀ / ▶: Previous or next page.
/activity roles
Activity Everyone

Lists each activity role, the points it needs, and how many members have it.

/activity graph [user] [compare_with] [days]
Activity Everyone

Posts a chart of a member's points, with lines marking each role.

OptionRequiredWhat it does
userOptionalWho to show. Defaults to you.
compare_withOptionalA second member to compare on the same chart.
daysOptionalHow many days the chart covers (2 to 365).
/activity setup
Activity Manage Server

The first time, opens a short setup. After that, opens the activity panel. Only you can use it.

On the panel
  • Turn on / Turn off: Turns points, roles and level-up messages on or off.
  • Set window: How many days of activity count, from 7 to 30.
  • Manage roles: Your reward roles:
    • Add role tier / Remove role tier: Add a role with its points, or remove one.
    • Strip old roles: On / Off: On: members keep only their highest role. Off: they keep every role they earned.
    • Sync roles: Updates everyone's roles now.
  • Announcements: Level-up messages:
    • DMs / Dedicated / Current: Send it by DM, to a channel you pick, or in the channel where the member was chatting.
    • Set channel: The channel for level-up messages.
    • Edit message: Your own text. Tags like {user}, {role} and {points} fill in automatically.
    • Send test card: Shows you a preview.
  • Blacklist: Channels or roles that earn no points, like a bot or staff channel.
  • Multipliers: Make some things worth more or less, from 0.1x to 5x: all points, text, voice, a channel, or a role.

Invites

See who invited each new member, rank your top inviters, and reward them with roles.

Off by default. Turn it on in /invites setup. Dexel needs Manage Server to see invite links.

How to use it

Set it up

  1. Run /invites setup. The first time, a short setup asks for the fake account age and an optional first reward role. Then press Turn on.
  2. To add more reward roles, press Manage invite roles > Add tier, pick a role, and type how many invites are needed (like 5).

How invites are counted

  1. Every member who joins through someone's link counts for them.
  2. Members who leave are taken off again.
  3. Brand new accounts (3 days or younger by default) count as fake and don't count.
  4. Joins through your server's custom link are shown separately.

Commands

/invites view [user] [duration]
Invites Everyone

With a member: their invites, leaves, fakes and rank. Without one: the server's member growth chart.

OptionRequiredWhat it does
userOptionalThe member to look up. Leave empty for the whole server.
durationOptionalTime span like 7d, 30d (default), 3mo or all.
On the panel
  • Active Server Invites: Lists the server's invite links, who made them, and how often they were used.
  • View Invite Codes: Lists one member's invite links and how each one did.
/invites leaderboard [duration] [page]
Invites Everyone

Posts a leaderboard image, 10 per page, with your own spot at the bottom.

OptionRequiredWhat it does
durationOptional7d, 30d, 1y or all (default).
pageOptionalWhich page to open.
On the panel
  • Filter Timeframe: All time, past 7, 14 or 30 days.
  • ◀ / ▶: Previous or next page.
/invites setup
Invites Manage Server

The first time, opens a short setup. After that, opens the invites panel. Only you can use it.

On the panel
  • Turn on / Turn off: Turns invite tracking and reward roles on or off.
  • Fake age: Accounts younger than this many days (0 to 30) count as fake.
  • Rejoins as fake: On / Off: On: someone who leaves and rejoins through a different link counts as fake. Off: they count as a normal join.
  • Manage invite roles: Add tier gives a role at a number of invites. Remove tier removes one. Members lose the role if their count drops.

Giveaways

Host giveaways that members join with one button. Add entry requirements, bonus entries for certain roles, or a Split or Steal twist.

On by default. You can switch it off in /giveaway setup.

How to use it

Host a giveaway

  1. Run /giveaway create in the channel where the giveaway should go (or pick one with the channel option).
  2. Fill in the form: prize, duration (like 2h or 1d), number of winners, and claim instructions that winners get by DM.
  3. A setup card appears. Optionally add requirements, a required or blocked role, bonus entries for roles, or a participant cap.
  4. Press Launch. The giveaway is posted and you get its Giveaway ID. Keep it: every other giveaway command uses it.
  5. When time runs out, winners are drawn, announced in the channel, and sent the claim instructions by DM.

Enter a giveaway (members)

  1. Press Enter on the giveaway post.
  2. Make sure your DMs are open for the server. Dexel DMs you a receipt, and you can't enter without it.
  3. You get a private card with your entries and your chance to win. If you are missing a requirement, it tells you which one.

Manage a running giveaway

  1. Find the ID with /giveaway list (it is also at the bottom of the giveaway post).
  2. Change the prize, time, winners or cap with /giveaway edit.
  3. Freeze it with /giveaway pause and continue with /giveaway resume. Paused time is added back.
  4. Finish early with /giveaway end, or stop it with no winners with /giveaway cancel.
  5. Need a new winner after it ended? Use /giveaway reroll.

Split or Steal

  1. In the setup card, press Format: Standard to switch it to Format: Split or Steal. Decision window sets how long finalists get to choose (24h by default).
  2. When it ends, 2 finalists are drawn and each gets a DM with Split and Steal buttons. Choices stay secret.
  3. Both split: both win. One steals: the stealer wins it all. Both steal: nobody wins.
  4. If time runs out before both choose, a Reroll finalists button is posted for the host.

Buttons on the giveaway post

  • Enter: Join the giveaway. Shows your entries and chance to win, or which requirement you are missing.
  • My Odds: See your entries and chance to win. Refresh my entries updates your entries if you got a bonus role later.
  • Entries: See everyone who entered and their entries, 10 per page.
  • Leave: Remove your entry from your private card. The DM receipt has a Leave giveaway button too.

Commands

/giveaway setup
Giveaways Manage Events or Manage Server

Opens the giveaway settings card in the channel. Only you can press its buttons.

On the panel
  • Status: Whether giveaways are on, and how many are active or paused.
  • Turn on / Turn off: Turns giveaways on or off. While off, other giveaway commands are blocked and timers pause. Overdue giveaways end once it is back on.
  • Refresh: Reloads the card.
/giveaway create [channel] [ping_role]
Giveaways Manage Events or Manage Server

Opens a short form, then a setup card where you fine-tune the giveaway. Nothing is posted until you press Launch.

OptionRequiredWhat it does
channelOptionalWhere to post the giveaway. Defaults to the current channel.
ping_roleOptionalRole to ping when the giveaway starts, like @Giveaways.
Form and setup card
  • Form: Prize, duration (30m, 2h, 1d, 1h30m), number of winners, and claim instructions sent to winners by DM.
  • Requirements: Set a minimum account age, time in the server, or Activity points (last 30 days). You can also list up to 5 custom rules that are shown on the post (not checked by Dexel).
  • Required role: Only members with this role can enter.
  • Blocked role: Members with this role can't enter.
  • Ping role: Role pinged when the giveaway launches.
  • Bonus entries: Give a role bonus entries (2x to 10x). A member gets the highest bonus among their roles. Clear all removes them.
  • Member limit: Most members who can enter. The giveaway ends as soon as it is full. Leave empty for no limit.
  • Format: Switch between a normal draw and Split or Steal.
  • Decision window: Split or Steal only: how long finalists have to choose.
  • Launch: Posts the giveaway and shows its ID and a link to it.
  • Cancel: Throws the setup away.

Using an Activity points requirement? Make sure Activity is turned on, or nobody will have points.

/giveaway edit <giveaway_id> [prize] [add_duration] [winners] [max_participants] [claim_info]
Giveaways Manage Events or Manage Server, or the giveaway host

Changes an active or paused giveaway. The post updates right away. Ended giveaways can't be edited.

OptionRequiredWhat it does
giveaway_idRequiredThe Giveaway ID.
prizeOptionalNew prize text.
add_durationOptionalAdd or remove time, like +30m, -1h, +1d.
winnersOptionalNew number of winners.
max_participantsOptionalNew member limit. 0 removes it.
claim_infoOptionalNew claim instructions for winners.
/giveaway pause <giveaway_id>
Giveaways Manage Events or Manage Server, or the giveaway host

Freezes the timer and disables the Enter button. The post shows "Giveaway Paused".

OptionRequiredWhat it does
giveaway_idRequiredThe Giveaway ID.
/giveaway resume <giveaway_id>
Giveaways Manage Events or Manage Server, or the giveaway host

Restarts a paused giveaway. The paused time is added back, so it doesn't lose any time.

OptionRequiredWhat it does
giveaway_idRequiredThe Giveaway ID.
/giveaway info <giveaway_id>
Giveaways Manage Events or Manage Server, or the giveaway host

Shows a private card with the giveaway's details, number of entries, and the top 5 entrants with their chances.

OptionRequiredWhat it does
giveaway_idRequiredThe Giveaway ID.
On the panel
  • Pause / Resume: Pauses or resumes the giveaway.
  • End now: Ends it now and draws winners.
  • Cancel: Stops it with no winners.
/giveaway end <giveaway_id>
Giveaways Manage Events or Manage Server, or the giveaway host

Ends the giveaway as if time ran out: winners are drawn, announced, and sent a DM. For Split or Steal, this draws the 2 finalists.

OptionRequiredWhat it does
giveaway_idRequiredThe Giveaway ID.
/giveaway reroll <giveaway_id> [winner_count]
Giveaways Manage Events or Manage Server, or the giveaway host

Draws new winners from people who haven't won yet, announces them in the channel, and DMs them the claim instructions.

OptionRequiredWhat it does
giveaway_idRequiredThe Giveaway ID. The giveaway must have ended.
winner_countOptionalHow many new winners. Default 1.
/giveaway cancel <giveaway_id>
Giveaways Manage Events or Manage Server, or the giveaway host

Stops the giveaway. The post changes to "Giveaway Cancelled" and nobody wins.

OptionRequiredWhat it does
giveaway_idRequiredThe Giveaway ID.
/giveaway list
Giveaways Everyone

Posts a list of every running giveaway with its ID, prize, number of entries, and when it ends.

Tournaments

Run brackets, Swiss, round robin, groups, free for all and race tournaments, solo or in teams, with their own channels and match rooms.

On by default. Turn it off in /tournament setup or the dashboard's Server settings. Free servers get 32 players and 1 tournament at a time. Premium gets 1,024 players and 10 at a time.

How to use it

Run a tournament (staff)

  1. Turn tournaments on with /tournament setup and pick a staff role.
  2. Run /tournament create and follow the steps: format, players, schedule, matches, extras, review. Every step has a default, so Next always works.
  3. Press Create tournament. Dexel makes a category with five channels and a player role, and posts the sign-up card.
  4. Members press Register on the card. Set a start time and Dexel starts on its own, or press Start in /tournament manage.
  5. Each match gets a room. Players report scores there, and staff approve them in the staff channel. The bracket moves on by itself.

Play in one (members)

  1. Press Register on the tournament card. If it is full, press Join waitlist and you move up when a place frees.
  2. If there is check-in, press Check in when it opens, or you lose your place.
  3. When your match is ready, you get a room. Press Ready, play, then press Report result or use /tournament report.
  4. Think a result is wrong? Press Dispute on it within 15 minutes.
  5. /tournament info shows where you stand and your next match.

Formats

  • Single and double elimination: Lose once (or twice) and you are out. Optional third-place match, best of for the final, and a grand final reset.
  • Round robin: Everyone plays everyone. Ranked by a table with tiebreaks.
  • Swiss: Players with the same record meet each round, with no rematches.
  • Groups into playoffs: Round robin groups first. Staff press Start playoffs to send the top players to a bracket.
  • Free for all: Lobbies of many players scored by placement and kill points over several games. The top of each lobby moves on.
  • Race: Heats ranked by best time or score.

The five channels

  • info: The tournament card with Register and Leave. From the start it also holds the bracket and the matches being played.
  • results: A result card for every finished match, then the champion and podium.
  • chat: Talk about the tournament.
  • matches: One card per match room. Rooms are threads, opened only when both sides are known and locked after the result.
  • staff: Private. Score claims, disputes and no-shows land here, each with Approve, Set score, Open room and Manage buttons.

You can also add an optional chat or voice channel from Extras. Every channel opens with a picture card that keeps a live line: rooms open, claims waiting, results so far.

Teams

  • Team size: Solo, or teams of 2 to 6 with optional substitutes. Set in the create steps.
  • Create a team: The captain names the team and invites players. Each player presses Accept or declines.
  • Full line-up: A team takes a place only once it is full.
  • Captain controls: Remove players, rename the team, hand over the captaincy or disband it, until the roster locks at the start. See /tournament team.

Scores

  • Staff approve (default): Every claim goes to the staff channel, where staff approve or reject it.
  • Players confirm: The other side presses Confirm. If they press That's wrong, the claim goes to staff.
  • Corrections: Staff can set a score, reopen a result (later results that depended on it are reset) or disqualify a player, up to 24 hours after the end.
  • Time limits: Optional per match, with a Ready button and a halfway reminder. A no-show either tells staff or gives a walkover to the side that was ready.
  • Match DMs: On by default. Players get a DM when their room opens and when half their time is gone, with buttons to the room and the web. Turn it off in Extras.

Buttons on the tournament card

  • Register / Join waitlist / Leave: Join or leave before the start.
  • Check in: Shown while check-in is open.
  • My match / My team: Your next match and your team, only to you.
  • Bracket: The full bracket or table, with My part and a page picker for big ones.
  • Rules / Info / Watch the stream: Shown when the host added them.
  • Spectate: Get the spectator role and be pinged with the players. Shown when turned on.
  • Withdraw: Leave a running tournament. In a match room you can also Forfeit match for just one match.

On the web

  • Members: Every server you share with Dexel shows up in the dashboard. Its Tournaments section lists live, open and past tournaments. Open one for the full bracket, matches, players and info.
  • Players: Join, check in, manage your team, press Ready, report a score with a screenshot, confirm or dispute, all from the tournament window.
  • Staff: Create tournaments (each field is checked as you fill it in, and a problem shows right under the field), and run them from the Manage tab. Changes save as you make them. The Activity tab lists every change.
  • Server settings: Turn tournaments on or off, pick the staff role, block roles and members, set starting values, or reset.

Every card in Discord has an Open on web button that opens the same tournament here.

Commands

/tournament setup
Tournaments Manage Events or Manage Server

Opens the Tournaments Setup panel. Settings here apply to every tournament in the server.

On the panel
  • Turn on / Turn off: Turns tournaments on or off. While off, the other tournament commands are blocked.
  • Tournament staff role: Members with this role can approve scores and run every tournament. A tournament's own player or spectator role can't be picked, since everyone who joins gets it.
  • Blocked roles / Blocked members: Up to 25 of each. They can't join any tournament here.
  • Starting values: What a new tournament starts with (format, players, best of, score mode, check-in, extras). Save them from the last step of /tournament create or on the web. Clear goes back to Dexel's defaults.
  • Reset: On the More page. Clears the blocklists and starting values and turns tournaments back on (the default). The staff role stays.
/tournament create <name> [game]
Tournaments Manage Events or Manage Server

Opens a step by step setup. Nothing is made until you press Create tournament on the review step.

OptionRequiredWhat it does
nameRequiredWhat the tournament is called.
gameOptionalThe game being played.
The steps
  • Format: Single or double elimination, round robin, Swiss, groups into playoffs, free for all or race.
  • Players: Player cap, solo or team size, and substitutes.
  • Schedule: Optional start time, when registration closes, and a check-in window.
  • Matches: Best of, third-place match, time limits and the no-show rule. Free for all sets lobbies and games instead.
  • Extras: Score mode, rules and info, chat and voice channels, Discord event, Spectate and match DMs.
  • Save as server defaults: On the review step, for staff who can change server settings. New tournaments then start with these settings.
  • Review: Check everything, then press Create tournament. Skip to review jumps here from any step.
/tournament manage [tournament]
Tournaments Manage Events or Manage Server, or the tournament host or tournament staff

Opens the panel to run one tournament. The host, tournament staff and members with Manage Server or Manage Events can use it.

OptionRequiredWhat it does
tournamentOptionalWhich tournament. Not needed inside its channels.
Pages
  • Home: Status, then Start before it begins, or Matches and Start playoffs once it runs.
  • Queue: While it runs. Score claims and disputes waiting for staff, with Approve, Reject, Reopen match and Dismiss. The button shows how many are waiting.
  • Activity: Every change in plain words with who did it, when, and the details (scores, who moved where, what was blocked, the reason given for a dispute), newest first, 10 at a time. The website's Activity tab shows the same lines, grouped by day, with filters for results, players, settings and start and end.
  • Schedule: Set a start time, check-in window and when registration closes. Start by hand instead clears the time.
  • Seeds: Order players by hand with a first-round preview, Shuffle, or reset to Join order.
  • Entrants: See who joined. Remove a player, or disqualify one once it is running.
  • Matches: Matches being played. Set a score, give a walkover when one side forfeits, enter results for a lobby or heat, close a room, or reopen a result.
  • Staff: The host, the server staff role, and an extra staff role just for this tournament.
  • Extras: Score mode, rules, info and stream link, showing them in match rooms, chat and voice channels, Discord event, Spectate, match DMs.
  • Share: Post copies of the sign-up card in up to 5 other channels, with an optional role ping. Copies stay in sync.
  • More: Add test players before the start, Cancel tournament while live, or Remove channels after it ends. Results stay in /tournament info.
/tournament list
Tournaments Everyone

Lists the server's tournaments with their status (registration open, check-in open, running, finished, cancelled) and info channel.

/tournament info [tournament]
Tournaments Everyone

Shows the tournament card: status, players, places once it ends, and your next match.

OptionRequiredWhat it does
tournamentOptionalWhich tournament. Not needed inside its channels.
/tournament team [tournament]
Tournaments Everyone

Shows your team, only to you. Roster changes are the captain's, before the start.

OptionRequiredWhat it does
tournamentOptionalWhich tournament. Not needed inside its channels.
On the panel
  • Create a team: Name a team and become its captain.
  • Invite players: Pick players. They get an invite to accept or decline.
  • Remove a player or an invite: Take someone off the roster.
  • Hand the captaincy: Make another player the captain.
  • Rename: Change the team name.
  • Leave team / Disband team: Leave as a player, or end the team as captain.
/tournament report <your_score> <opponent_score> [proof] [tournament]
Tournaments Everyone

Reports the score of your current match. The screenshot is posted in your room. In a lobby or heat, press Report result in the room instead.

OptionRequiredWhat it does
your_scoreRequiredYour score (games won in a best of 3 or more).
opponent_scoreRequiredYour opponent's score.
proofOptionalA screenshot of the result. An image of 10 MB or less.
tournamentOptionalWhich tournament. Not needed inside its channels.

Starboard

When a message gets enough ⭐ reactions, Dexel copies it to a highlights channel.

Off by default. Turn it on in /starboard setup.

How to use it

Set it up

  1. Create a channel for highlights, like #starboard.
  2. Run /starboard setup. The first time, a short setup asks for the channel and star count. Then press Turn on.
  3. Optional: change how many stars are needed (3 by default) or the emoji.

How messages get there

  1. Members react to a message with ⭐.
  2. Once it has enough stars, Dexel posts a copy in the starboard channel with a link back to the message.
  3. The star count on the copy keeps updating.

Commands

/starboard setup
Starboard Manage Server

The first time, opens a short setup. After that, opens the starboard panel with your current settings. Only you can use it.

On the panel
  • Select the starboard channel: Where starred messages are posted.
  • Turn on / Turn off: Turns the starboard on or off.
  • Threshold: How many stars a message needs, from 1 to 25. Default 3.
  • Change star emoji: Use another emoji, including a custom one from your server.
  • Self-star: On / Off: Whether starring your own message counts.
  • Bot messages: On / Off: Whether bot messages can be starred.
  • Select ignored channels: Up to 10 channels whose messages are never starred.
  • Reset defaults: After you confirm, goes back to ⭐ and 3 stars and turns the starboard off. Keeps the channel.
/starboard leaderboard
Starboard Everyone

Shows the top 10 members by stars received, and where you rank.

On the panel
  • View dropdown: Switch between Top Starred Members and Most Starred Messages.

Sticky Messages

Keep a message at the bottom of a channel. Dexel reposts it whenever new messages push it up.

Off by default. Turn it on in /sticky. Up to 3 channels, or 25 with Premium.

How to use it

Add a sticky message

  1. Run /sticky and press Turn on.
  2. Press Add sticky and pick the channel.
  3. Press Edit text and type your message. Or press Switch to embed for a styled box.
  4. Save. Dexel posts it right away and keeps it at the bottom.

Change or stop it

  1. Run /sticky and pick the channel from the dropdown.
  2. Press Pause to stop it for a while, or Delete to remove it.

Commands

/sticky
Sticky Manage Messages or Manage Server

Opens the sticky panel with how many sticky channels you are using. Only you can use it.

On the panel
  • Channel dropdown: Open a sticky you already have.
  • Turn on / Turn off: Turns all sticky messages on or off.
  • Add sticky: Pick a channel for a new sticky.
  • Refresh: Reloads the panel.
  • On a channel's page:
    • Turn on / Pause: Start or pause this sticky.
    • Edit text: Write the message (markdown works).
    • Switch to embed / Edit embed: Use a styled box with title, text, footer, color, and an optional link button.
    • Preview: Shows you how it looks.
    • Delete: Removes the sticky after you confirm.

Dexel waits for 5 seconds of quiet before reposting, so it doesn't spam busy channels.

Feeds

Post new Reddit posts, YouTube videos and GitHub releases in a channel automatically.

Off by default. Turn it on in /feeds. Free servers get 3 feeds checked every 10 minutes. Premium gets 100, checked every minute.

How to use it

Add a feed

  1. Run /feeds and press Turn on.
  2. Press Add Feed and pick Reddit Feed, YouTube Feed, GitHub Repo or GitHub User.
  3. Fill in the subreddit, YouTube channel (like @mkbhd), repo (like vercel/next.js) or GitHub username.
  4. Pick the channel to post in and, if you want, a role to ping.
  5. Press Save & Activate Feed. Only new posts from now on are sent.

Check a feed works

  1. In /feeds, pick the feed from the dropdown and press Test Post. The newest item is posted without pinging anyone.

Commands

/feeds
Feeds Manage Server

Opens the feeds panel with every feed in the server and how many you've used. Only you can use it.

On the panel
  • Turn on / Turn off: Turns all feeds on or off.
  • Add Feed: Add a new feed:
    • Reddit Feed: A subreddit. Optionally only posts with certain flairs, like News, Patch Notes.
    • YouTube Feed: A channel's new uploads.
    • GitHub Repo: New releases, commits, tags or wiki edits. Optionally filter by keywords.
    • GitHub User: Someone's public activity, like new repos and pull requests.
    • Custom message: Text posted with each item. Tags like {title}, {url} and {role} fill in automatically.
  • Feed dropdown: Open a feed to manage it:
    • Change target channel: Move the feed to another channel.
    • Test Post: Post the newest item now.
    • Edit Settings: Change the filter and custom message.
    • Webhook: On / Off: Premium. Posts show the platform's name and logo instead of Dexel's.
    • Posting: On / Off: Pause or resume this feed.
    • Delete Feed: Removes the feed after you confirm.
  • Refresh: Reloads the list.

Give Dexel Send Messages and Embed Links in the feed channel. If it loses them, the feed is removed.

Counting

A counting game in one channel: members count up together, one number at a time.

Off by default. Finishing the setup in /counting setup turns it on.

How to use it

Set it up

  1. Run /counting setup. The first time, a short setup asks for the counting channel. Then press Turn on.
  2. Optional: press Set count to start from a number other than 0.

How to play

  1. Send the next number. If the count is 41, send 42.
  2. Math works too: 40+2 or (6*7) count as 42.
  3. A correct number gets a ✅. A wrong number gets a ❌ and the count goes back to 0.
  4. You can't count twice in a row. Wait for someone else.
  5. Normal chat messages are ignored, so people can still talk in the channel.
  6. If someone deletes or edits the last number, Dexel posts what the next number is.

Commands

/counting setup
Counting Manage Server

The first time, opens a short setup. After that, opens the counting settings card with the current count, next number, high score, and last counter. Only you can press its buttons.

On the panel
  • Channel dropdown: Pick the counting channel. This turns counting on. Dexel warns you if it can't post or react there.
  • Turn on / Turn off: Turns the game on or off without removing the channel.
  • Set count: Set the current count to any number.
  • Reset to 0: Starts the count over. The high score is kept.
  • Unlink channel: Removes the channel and turns counting off.
  • Refresh: Reloads the card.
/counting stats
Counting Everyone

Posts the counting channel, current count, next number, high score, and who counted last.

/counting reset
Counting Manage Server

Sets the count back to 0. The high score is kept.

/counting disable
Counting Manage Server

Removes the counting channel and turns the game off. The count and high score are kept for next time.

Music

Play music in your voice channel and control it from a shared player card.

How to use it

Play music

  1. Join a voice channel.
  2. Run /play and pick a song from the list, or paste a JioSaavn, Spotify or YouTube link to a song, playlist or album.
  3. Dexel joins and posts the player. More /play commands add songs to the queue.

Control it

  1. Use the buttons on the player. You need to be in Dexel's voice channel.
  2. Lost the player? Run /music booth to post it again.
  3. Once nothing is playing (the queue ended, it is paused, or nobody is listening), Dexel leaves 10 minutes after the last music command or button. On Premium servers it stays 24 hours.

Skip a song

  1. Press ⏭ on the player or run /skip.
  2. The person who picked the song, anyone with Manage Server, or the only listener skips right away.
  3. Anyone else adds a vote. The song is skipped once half the listeners have voted. Votes from people who leave the channel don't count.

Keep the music going

  1. Press Autoplay on the player. When the queue runs out, Dexel keeps playing songs like the last one.
  2. Autoplay lasts 1 hour, or 24 hours on Premium servers, and only plays while someone is in the voice channel. It turns off when Dexel leaves.

Sing along

  1. Press Lyrics on the player. Everyone sees the lyrics on the player itself.
  2. It follows the song: the line being sung is in bold, with the line before and after it.
  3. Press Lyrics again to hide them. The playbar keeps moving either way.

Save songs you love

  1. Press the red heart next to the song title. Only you see the reply. Press it again to remove the song.
  2. Run /music liked to see your liked songs and play them. You can keep up to 1000.

Repeat

  1. Press Loop on the player. It cycles Queue (the whole queue again and again), Song (the current song) and off.
  2. While Loop is on, Autoplay waits. Next still skips a looping song.

Make playlists

  1. Run /playlist create, or press the add-to-playlist button on the player to save the current song.
  2. In /queue, Save as playlist saves the whole queue at once.
  3. Play one with /playlist play. You can have 10 playlists of up to 200 songs, or 50 of up to 1000 with Premium.

Bring playlists from Spotify or YouTube

  1. Run /playlist import with a Spotify, YouTube (or YouTube Music) or JioSaavn playlist or album link.
  2. Dexel finds every song on JioSaavn and saves them as your playlist. Songs that aren't on JioSaavn are skipped, and you can see which ones.
  3. Spotify shares only the first 100 songs of a playlist. Albums always come in full.

Share a playlist

  1. Open your playlist with /playlist view and press Share to get its code.
  2. Friends run /playlist open with the code, then play it or press Save to keep it.

Find a song from earlier

  1. Run /music history to see the last 50 songs played in the server, and play, like or save any of them.

While a song plays, Dexel shows it as the voice channel status. This needs the Set Voice Channel Status permission.

Commands

/play <query>
Music Everyone

Joins your voice channel and plays the song, or adds it to the queue. Playlist and album links from JioSaavn, Spotify and YouTube add every song found on JioSaavn.

OptionRequiredWhat it does
queryRequiredA song name (pick from the list), or a JioSaavn, Spotify or YouTube link to a song, playlist or album.
/skip
Music Everyone

Skips the song, or adds your vote to skip it. You need to be in Dexel's voice channel.

  • The person who picked the song, anyone with Manage Server, or the only listener skips right away.
  • Otherwise the song is skipped once half the listeners have voted.
/music booth
Music Everyone

Posts the player card with the song, the playbar, what's next and live lyrics. It keeps updating while the song plays.

On the panel
  • Heart (next to the title): Saves the song to your liked songs, or removes it.
  • Autoplay: Keeps playing similar songs when the queue runs out, for 1 hour (24 hours on Premium). Green while on.
  • Back / Pause / Next: Previous song, pause or resume, skip. If others are listening, skipping starts a vote (same rules as /skip).
  • Loop: Cycles Queue (repeat the queue), Song (repeat this song) and off. Green while on.
  • Volume / + / -: Set an exact volume (1 to 200%), or change it by 10%.
  • Add to playlist: Saves the song to one of your playlists, or a new one. Only you see it.
  • Effects: Bass Boost, Nightcore, Vaporwave, 8D, Karaoke, Tremolo, Vibrato, or Normal. Green while an effect is on.
  • Queue: Opens the queue.
  • Lyrics: Shows or hides live lyrics on the player. Green while on.
  • Info: Shows you the details: who picked the song, volume, loop, effect, autoplay time left, queue length, skip votes and album.
/music liked
Music Everyone

Shows your liked songs privately, 10 per page. Like a song with the heart on the player. You can keep up to 1000.

On the panel
  • ◀ / ▶: Change page.
  • Play all / Shuffle: Plays up to 100 of your liked songs, in order or mixed up. You need to be in a voice channel.
  • Pick a song: Play it or remove it from your liked songs.
/music history
Music Everyone

Shows the last 50 songs played in this server privately, 10 per page. Autoplay picks are included.

On the panel
  • Pick a song: Play it, add it to a playlist, or like it.
  • Play all: Queues them all, oldest first. You need to be in a voice channel.
  • Save as playlist: Adds them all to one of your playlists.
/playlist view [playlist]
Music Everyone

Shows your playlists and the ones you saved, or opens one. Only you see it.

OptionRequiredWhat it does
playlistOptionalA playlist to open, or Liked songs. Leave it empty to see them all.
On the panel
  • Play / Shuffle: Plays the playlist in order or mixed up.
  • Share: Shows the code friends use with /playlist open.
  • Rename / Delete: Your own playlists only. Deleting asks first.
  • Pick a song: Play it, add it to another playlist, like it, or remove it.
  • New playlist / Import: On the list of all your playlists.
/playlist play <playlist> [shuffle]
Music Everyone

Plays one of your playlists, a saved one, or your liked songs. The first song starts right away. You need to be in a voice channel.

OptionRequiredWhat it does
playlistRequiredPick from the list.
shuffleOptionalPlay in random order.
/playlist create <name>
Music Everyone

Makes a new empty playlist. Add songs from the player or from /queue. 10 playlists of up to 200 songs, or 50 of up to 1000 with Premium.

OptionRequiredWhat it does
nameRequiredUp to 100 characters.
/playlist import <link> [name] [play]
Music Everyone

Saves a Spotify, YouTube (or YouTube Music) or JioSaavn playlist or album as your own playlist. Each song is found on JioSaavn; songs that aren't there are skipped and listed.

OptionRequiredWhat it does
linkRequiredLink to the playlist or album.
nameOptionalDefaults to the original name.
playOptionalStart playing it right away.
/playlist open <code>
Music Everyone

Opens a playlist someone shared with you. Play it, or press Save to keep it in your playlists.

OptionRequiredWhat it does
codeRequiredThe 8-character share code.
/playlist rename <playlist> <name>
Music Everyone

Renames one of your playlists.

OptionRequiredWhat it does
playlistRequiredOne of your playlists.
nameRequiredThe new name.
/playlist delete <playlist>
Music Everyone

Deletes one of your playlists after asking. People who saved it lose it too.

OptionRequiredWhat it does
playlistRequiredOne of your playlists.
/queue
Music Everyone

Shows the queue privately, 5 songs per page.

On the panel
  • ◀ / ▶: Change page.
  • Shuffle: Mixes up the queue.
  • Clear: Empties the queue. The current song keeps playing.
  • Remove a track: Removes one song.
  • Save as playlist: Saves the current song and the whole queue to one of your playlists.
/music leaderboard [scope]
Music Everyone

Shows the top 10 listeners by listening time.

OptionRequiredWhat it does
scopeOptionalserver (default) or discord for everyone.
On the panel
  • View dropdown: Switch between Top Listeners and Top Songs.

Economy

Earn coins every day, send them to friends, and see who has the most.

How to use it

Earn and send coins

  1. Use any Dexel command. Your first one each day gives you 5 coins (the day resets at midnight India time).
  2. Check your balance with /wallet.
  3. Send coins with /give, like /give user:@friend coins:50.

Commands

/wallet [user]
Economy Everyone

Shows the balance, global rank, and whether today's 5 coins are claimed.

OptionRequiredWhat it does
userOptionalWhose wallet to see. Defaults to you.
/give <user> <coins>
Economy Everyone

Moves coins from your wallet to theirs and shows both new balances. They get a note in their /inbox.

OptionRequiredWhat it does
userRequiredWho gets the coins.
coinsRequiredHow many.
/economy leaderboard [scope]
Economy Everyone

Posts a leaderboard image, 10 per page, with your own rank at the bottom.

OptionRequiredWhat it does
scopeOptionalserver (default) or discord for everyone.
On the panel
  • Scope dropdown: Switch between this server and everyone.
  • ◀ / ▶: Previous or next page.
/inbox
Economy Everyone

Privately shows your last 5 notifications: coins received, vote thank-yous, and reminders.

On the panel
  • ◀ Previous / Next ▶: Move between notifications.
/shop
Economy Everyone

Nothing can be bought yet.

Reminders

Set a reminder and Dexel messages you at the right time.

Up to 5 active reminders, or 50 with Premium.

How to use it

Set a reminder

  1. Set your timezone once in /settings so times like 6pm are right.
  2. Run /remind create, like /remind create time:2h message:Take a break.
  3. When it's time, Dexel DMs you (and posts in a channel if you picked one). Press Snooze 5m, Snooze 15m or Snooze 1h to be reminded again later.

Commands

/remind create <time> <message> [channel] [category]
Reminders Everyone

Schedules the reminder and shows when it will fire.

OptionRequiredWhat it does
timeRequiredIn a while: 10m, 2h, 1h30m, 1d. A time: 18:00, 9am, tomorrow 9am. A date: 2026-08-25 15:30.
messageRequiredWhat to remind you about.
channelOptionalAlso post it in this channel and ping you.
categoryOptionalA label: General, Work, Study, Health, Gaming or Personal.
When the reminder fires
  • Snooze 5m / 15m / 1h: Remind you again later.
  • Dismiss: Mark it as done.
/remind list
Reminders Everyone

Opens your reminders, 4 per page.

On the panel
  • Filter dropdown: Show active, past, canceled, or all reminders.
  • Cancel dropdown: Pick a reminder to cancel it.
  • Previous / Next: Change page.
/remind cancel <reminder>
Reminders Everyone

Cancels one of your active reminders.

OptionRequiredWhat it does
reminderRequiredPick the reminder from the list.

AFK

Mark yourself as away. People who ping you are told why, and you get a list of missed pings when you're back.

Off by default. An admin turns it on with Server AFK in /afk setup.

How to use it

Turn it on (admins)

  1. Run /afk setup and press Server AFK: Off so it shows On.

Go AFK

  1. Run /afk set, like /afk set reason:Studying duration:2h.
  2. Dexel adds [AFK] to your nickname.
  3. Anyone who pings you gets a short reply with your reason.

Come back

  1. Send any message. Your AFK ends and your nickname goes back to normal.
  2. Dexel DMs you a list of who pinged you, with links.

Commands

/afk set [reason] [scope] [duration]
AFK Everyone

Posts a card with your reason and how long you'll be away.

OptionRequiredWhat it does
reasonOptionalWhy you're away, like Studying or Sleeping.
scopeOptionalGlobal (every server, default) or Server-Only.
durationOptionalEnd it automatically, like 30m, 2h, 1d (max 30 days).
On the panel
  • Clear AFK: Ends your AFK now.
  • Settings: Opens your AFK settings.
/afk clear
AFK Everyone

Ends your AFK, fixes your nickname, and DMs you your missed pings.

/afk setup
AFK Everyone

Opens your AFK settings privately. They apply in every server.

On the panel
  • Edit title: What people see when they ping you. {user} is your name.
  • Nickname: On / Off: Add [AFK] to your nickname.
  • DM inbox: On / Off: Get your missed pings by DM when you're back.
  • Server AFK: On / Off: Admins only. Turns AFK on or off for the server.
/afk status [user]
AFK Everyone

Privately shows the AFK reason and since when. For yourself, also how many pings are waiting.

OptionRequiredWhat it does
userOptionalWho to check. Defaults to you.
/afk list
AFK Everyone

Lists every AFK member with their reason, 5 per page.

Profile & Settings

See a profile card for any member and change your own settings: timezone, notifications and privacy.

How to use it

Set up your profile

  1. Run /profile, pick About & AI Memory in the dropdown, and press Edit Bio.
  2. Run /settings and press Set Timezone (like America/New_York or Asia/Kolkata) so reminder times are right.

Commands

/profile [user]
Profile Everyone

Posts a profile card in the channel. Use the dropdown to switch sections.

OptionRequiredWhat it does
userOptionalWhose profile. Defaults to you.
On the panel
  • Overview: Account and join dates, timezone, badges, activity rank, coins and bio.
  • Activity & Rank: Rank, current role, progress to the next one, and a rank card.
  • About & AI Memory: The bio. On your own profile, also your AI usage and what Dexel remembers about you (only you can see it):
    • Edit Bio: Write your bio.
    • Edit Memory: Tell Dexel what to remember or forget, like "I prefer Python".
    • Clear Memory: Wipes what Dexel remembers about you.
  • Server Details: Join position, boosting, invites, roles and key permissions.
  • Music Profile: Plays, listening hours and top songs.
/settings
Profile Everyone

Opens your personal settings. They apply in every server.

On the panel
  • Activity DMs: A DM when you earn a new activity role.
  • Rewards & Inbox: A small note when you get your daily coins.
  • Vote Reminders: A DM when you can vote again.
  • Set Timezone: Your timezone, used for reminder times.
  • Data & Privacy: Your data:
    • AI Memory / Activity / Telemetry: Opt out of AI memory, activity points, or anonymous usage stats.
    • Export My Data: Sends you a file with your data.
    • Delete All My Data: Type DELETE to remove everything Dexel stores about you.

Branding

Give Dexel its own name, profile picture, banner and bio in your server.

Needs Premium on the server.

How to use it

Change how Dexel looks

  1. Make sure the server has Premium (see /premium).
  2. Run /branding with what you want to change, like nickname:Helper or an avatar image.
  3. Or run /branding with no options and press Edit name and bio.
  4. To undo everything, run /branding reset:True.

Commands

/branding [nickname] [bio] [avatar] [banner] [reset]
Branding Manage Server Premium

With options, changes Dexel's profile in this server right away. With no options, opens a panel showing the current look.

OptionRequiredWhat it does
nicknameOptionalDexel's name here, up to 32 characters.
bioOptionalDexel's About Me here, up to 190 characters.
avatarOptionalA profile picture (PNG, JPG, GIF or WEBP, up to 10 MB).
bannerOptionalA banner image, same formats.
resetOptionalGo back to the normal Dexel look.
On the panel
  • Edit name and bio: Change the nickname and bio.
  • Web dashboard: Opens the website, which is easier for uploading images.
  • Reset to default: Removes all custom branding after you confirm.

If Premium ends, Dexel goes back to its normal look automatically.

Bot Info & Premium

Find commands, vote for more AI usage, check if Dexel is online, and manage Premium.

How to use it

Vote for more AI usage

  1. Run /vote and press a vote button.
  2. Vote on the site. Within a minute you get +20% AI usage for 12 hours.
  3. Vote on all 3 sites for up to +60%. Weekend votes count double.
  4. You can vote again after 12 hours. Dexel can remind you.

Turn on Premium for a server

  1. Buy a slot on the Pricing page.
  2. In the server, run /premium and press Config > Activate.
  3. To move it, press Deactivate in the old server and Activate in the new one.

Commands

/help [command]
Bot Everyone

Opens the help menu. Pick a category, then a command, to see how it works.

OptionRequiredWhat it does
commandOptionalJump straight to a command, like remind create.
/vote
Bot Everyone

Shows your current boost and when you can vote again on each site.

On the panel
  • Vote buttons: Open Top.gg, Topbot.gg or Discord Bot List.
  • Vote Reminders: ON / OFF: Get a DM when you can vote again.
  • Refresh: Updates your status.
/premium
Bot Everyone

Shows your slots, which servers use them, and whether this server has Premium.

On the panel
  • Benefits: What Premium adds: 10x AI usage, 5x ticket AI, custom branding, 100 feeds, 25 sticky messages, 50 reminders.
  • Config: Activate uses a slot on this server (needs Manage Server). Deactivate frees it again.
  • Pricing & Plans: Opens the pricing page.
/about
Bot Everyone

Shows what Dexel is, how many servers use it, and useful links. Partners shows partner bots.

/invite
Bot Everyone

Shows links to add Dexel, the support server, the website, these docs, and the dashboard.

/ping
Bot Everyone

Shows how fast Dexel is responding.

Troubleshooting

Fixes for the most common problems.

Slash commands don't show up.
Discord can take a few minutes after Dexel joins. If they still don't appear, add Dexel again with the invite link.
A command says the module is disabled.
An admin needs to turn the module on, either with its setup command (like /starboard setup) or in /dashboard → Modules.
A command says it can't be used in this channel.
An admin limited it to certain channels. Check the module in /dashboard.
Dexel can't ban, time out, or give a role.
In Server Settings → Roles, drag the Dexel role above the member or role it should manage.
Nothing happens when I press a button.
Panels only work for the person who opened them, and they stop working after a few minutes. Run the command again.
I can't enter a giveaway.
Dexel has to DM you a receipt. Turn on Direct Messages for the server in its privacy settings and press Enter again.
I ran out of AI usage.
It resets every day at 00:00 UTC. Use /vote for +20% per vote, or get Premium for 10x.
A voice message wasn't turned into text.
Files over 25 MB are skipped, and admins can turn automatic transcripts off in /dashboard. Try right-click → Apps → Transcribe Audio.
Was this documentation page helpful?
ESC